Did you connect a new monitor with an HDMI cable only to find the screen looking washed out, as if covered by a thin layer of fog? Text is harder to read, and blacks look like hazy dark grays. Is the monitor panel defective? It usually is not a defect—the culprit is your graphics card’s color range setting.
Quick Summary
- The Cause: Over HDMI, the monitor is mistakenly recognized as a TV, limiting the color range to 16–235 (Limited Range).
- The Fix: Manually switch the signal output to 0–255 (Full Range) in your graphics card control panel.
- Key Settings by GPU: NVIDIA “Output dynamic range: Full”, Intel “Quantization Range: Full Range”, AMD “Pixel Format: RGB 4:4:4 PC Standard (Full RGB)”.
- Connection Note: DisplayPort-to-HDMI adapters or converters may disable this option.
Why Does the Screen Look Washed Out and Hazy?

Computer graphics and PC monitors are designed to operate in “Full Range,” utilizing all 256 color levels from 0 to 255. Pure black is set to 0 and pure white to 255, creating clear, deep contrast.
In contrast, standard TV broadcast standards historically adopted a “Limited Range” of 16 to 235 for signal compatibility. It is like having a digital piano with 256 keys, but locking out the lowest 16 bass keys and highest 20 treble keys.
The issue occurs when you connect a PC to a monitor using an HDMI cable. If the graphics driver misidentifies the monitor as a TV, it outputs a 16–235 signal. While the monitor expects pure black at 0, the PC sends gray at 16, leaving the entire display looking washed out and muddy.
Related Reading
144Hz Gaming Monitor: Should You Use HDMI or DisplayPort?
Office Monitors: IPS vs. VA Panel Comparison
How to Switch to Full Range (0–255) in Your Control Panel

To restore accurate colors, you need to manually force the signal output to “Full” in your GPU control panel. Menu names vary by manufacturer, so refer to the table below.
| Manufacturer | Application | Navigation Path | Setting to Select |
|---|---|---|---|
| NVIDIA | NVIDIA Control Panel | Display → Change resolution | Output dynamic range: Full (0–255) |
| Intel | Intel Graphics Command Center | Display → General | Quantization Range: Full Range |
| AMD | AMD Software: Adrenalin Edition | Display Settings | Pixel Format: RGB 4:4:4 PC Standard (Full RGB) |
1. NVIDIA Setup Steps
Right-click an empty area on your desktop and select [NVIDIA Control Panel]. From the left sidebar, navigate to [Display] → [Change resolution]. Under section 3, select “Use NVIDIA color settings.” Open the “Output dynamic range” dropdown, select Full (0–255), and click Apply. If video playback still looks washed out, go to [Video] → [Adjust video color settings] → [Advanced], and select “Full (0–255)” as well.
2. Intel Integrated Graphics Setup Steps
Open [Intel Graphics Command Center] (or Intel Graphics Control Panel). Navigate to the [Display] menu and go to the [General] tab. Locate the “Quantization Range” setting and change it to Full Range.
3. AMD Radeon Setup Steps
Right-click your desktop and open [AMD Software: Adrenalin Edition]. Go to the [Display] tab at the top and set “Pixel Format” to RGB 4:4:4 Pixel Format PC Standard (Full RGB).
Connection Limitations and Things to Check First

Before changing settings, verify how your monitor is connected. If you use a DisplayPort (DP) to HDMI adapter or converter between your PC and monitor, the Quantization Range option in Intel’s control panel may disappear, or AMD may disable pixel format adjustments. For complete control, connect your PC and display directly with a standard native cable.
Some older legacy monitors may not support full dynamic range. If text looks distorted or colors appear heavily crushed or clipped after making the switch, revert the setting back to Limited.
A common myth in hardware forums claims that AMD Radeon always defaults to Full Range while only NVIDIA drops to Limited. However, AMD’s official technical documentation (DH3-007) clarifies that Radeon cards can also default to Limited depending on the display’s EDID signal, which is why AMD provides a guide for manual adjustment.
Right-click your desktop now, open your graphics control panel, and check whether your output dynamic range is set to Full (0–255).
Related Articles
- Mouse Cursor Getting Stuck Between Dual Monitors? Here Is the Quick Fix
- Fix Dual Monitor Display Issues Instantly with Win + P Shortcut
- How to Test a New Monitor for Dead Pixels and Backlight Bleed in 1 Minute
- Why You Should Never Use Wet Wipes or Alcohol on Your Monitor Screen

답글 남기기